What triggers a pin-hole leak in a copper water pipe?
A pin-hole leak is a very small hole which develop in a pipe causing a mist or stream of water to shoot out. Most of the time these pipe leaks build due to the tubing being eroded internally. There are a variety of explanations that explain why a leak takes place. Many of the key variables that lead to a leak include age, your municipalities water pressure, the number of minerals associated with your water, how the pipes are put together (i.e. elbows, fittings, turns etc.), what time of year you are in, and just how the plumbing was placed.
Pinhole pipe leaks in copper pipes
Ordinarily the pipe leaks take place close to the water main inside your house. It occurs near the water main because this is the place that the water pressure is the greatest in your home. Very much like how water after some time can cut deeper into rock creating erosion. It also can rust the inside of your pater pipes. It slowly breaks down the inside of the water line until it subsequently gushes through.
Copper tubing dysfunction
Throughout the US in numerous locations and counties, you can find substantial water pressure with numerous minerals in the water supply. These elements put together with the common structure age of the home around 20-30 years suggests that there is a large range of pinhole leak telephone calls in recent years. Elevated mineral content in the water can result in a wide range of water line troubles. Everything from water heaters to faucets and water pipes are influenced by the mineral deposits. Using a softener in your drinking water does not help substantially either. Softening water doesn’t remove many of the minerals which were within this type of water.
PinHole Leaks in Pipe Fittings
Almost all of the variables that induce pinhole leaks cannot be avoided. We cannot alter the organic mineral levels or water temperature entering into the house and property. For the most part water leaks come about at or near the pipe joint. In other words where the interconnection is. This can be an elbow fitting or maybe a pipe coupling. As soon as water goes through one of these fittings there is always turbulence. Water whirls and revolves when it passes through the joint. Preventing that is fairly unavoidable. The turbulence causes the water to erode the water line from within.
Erosion in Pipe Fittings
Anytime a leak takes place at a joint it might be due to the installer failing to ream out the copper after cutting it. When a copper pipe is cut with a pipe cutter it gets pinched as it’s being cut. This creates a lip on the inside of the pipe. This lip can exaggerate the amount of turbulence that occurs at the joint. Often a pipe that has multiple holes generally occurs due to the installer not reaming out the pipe after cutting it.
If you get a pinhole leak what should you do?
Chances are good that if you are continually having to repair different pinhole leaks, you will want to seriously consider a full Copper Repipe. It is the only way to prevent a pinhole leak from reoccuring because of poor water quality. Repipe Specialists is the preferred service provider for full copper repiping. They provide free on-site estimates and can even assist in upgrading your fixtures and additional improvements like a tankless water heater. Their services are about half the cost of a local plumber and always backed by a lifetime guarantee.